RHCE Syllabus
System configuration and management
Route IP traffic and create static routes.
Use iptables to implement packet filtering and configure network address translation (NAT).
Use /proc/sys and sysctl to modify and set kernel runtime parameters.
Configure a system to authenticate using Kerberos.
Build a simple RPM that packages a single file.
Configure a system as an iSCSI initiator that persistently mounts an iSCSI target.
Produce and deliver reports on system utilization (processor, memory, disk, and network).
Use shell scripting to automate system maintenance tasks.
Configure a system to log to a remote system.
Configure a system to accept logging from a remote system.
Network services
Network services are an important subset of the exam objectives. RHCE candidates should be capable of meeting the following objectives for each of the network services listed below:
Install the packages needed to provide the service.
Configure SELinux to support the service.
Configure the service to start when the system is booted.
Configure the service for basic operation.
Configure host-based and user-based security for the service.
HTTP/HTTPS
Configure a virtual host.
Configure private directories.
Deploy a basic CGI application.
Configure group-managed content.
DNS
Configure a caching-only name server.
Configure a caching-only name server to forward DNS queries.
Note: Candidates are not expected to configure master or slave name servers.
FTP
Configure anonymous-only download.
NFS
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMB
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMTP
Configure a mail transfer agent (MTA) to accept inbound email from other systems.
Configure an MTA to forward (relay) email through a smart host.
SSH
Configure key-based authentication.
Configure additional options described in documentation.
NTP
Synchronize time using other NTP peers.
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMB
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMTP
Configure a mail transfer agent (MTA) to accept inbound email from other systems.
Configure an MTA to forward (relay) email through a smart host.
SSH
Configure key-based authentication.
Configure additional options described in documentation.
NTP
Synchronize time using other NTP peers.
System configuration and management
Route IP traffic and create static routes.
Use iptables to implement packet filtering and configure network address translation (NAT).
Use /proc/sys and sysctl to modify and set kernel runtime parameters.
Configure a system to authenticate using Kerberos.
Build a simple RPM that packages a single file.
Configure a system as an iSCSI initiator that persistently mounts an iSCSI target.
Produce and deliver reports on system utilization (processor, memory, disk, and network).
Use shell scripting to automate system maintenance tasks.
Configure a system to log to a remote system.
Configure a system to accept logging from a remote system.
Network services
Network services are an important subset of the exam objectives. RHCE candidates should be capable of meeting the following objectives for each of the network services listed below:
Install the packages needed to provide the service.
Configure SELinux to support the service.
Configure the service to start when the system is booted.
Configure the service for basic operation.
Configure host-based and user-based security for the service.
HTTP/HTTPS
Configure a virtual host.
Configure private directories.
Deploy a basic CGI application.
Configure group-managed content.
DNS
Configure a caching-only name server.
Configure a caching-only name server to forward DNS queries.
Note: Candidates are not expected to configure master or slave name servers.
FTP
Configure anonymous-only download.
NFS
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMB
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMTP
Configure a mail transfer agent (MTA) to accept inbound email from other systems.
Configure an MTA to forward (relay) email through a smart host.
SSH
Configure key-based authentication.
Configure additional options described in documentation.
NTP
Synchronize time using other NTP peers.
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMB
Provide network shares to specific clients.
Provide network shares suitable for group collaboration.
SMTP
Configure a mail transfer agent (MTA) to accept inbound email from other systems.
Configure an MTA to forward (relay) email through a smart host.
SSH
Configure key-based authentication.
Configure additional options described in documentation.
NTP
Synchronize time using other NTP peers.
No comments:
Post a Comment